Belden H125 PVC coaxial cable for cable and satellite TV installations.

• Copper conductor material
• Coaxial cable suitable for standard connector use
• Test methods according to European standard EN 50117-1
• Designed according to European standard EN 50117, operating at frequencies between 5 MHz and 2150 MHz, and international standard IEC 1196

1. Inner conductor: solid soft annealed copper
2. Dielectric: Gas injected PE
3. 1 Foil: copper / 3.2 Braid: annealed copper
4. PVC according to the European standard HD 624

1. Inner conductor diameter: 1.0 mm (±0.02 mm)
2. Dielectric diameter: 4.8 mm (±0.15 mm)
3. Outer screen conductor diameter: 5.24 mm (±0.2 mm)
4. Outside diameter: 6.8 mm (±0.2 mm)

Technical specifications Belden H125 PVC coaxial cable

• Adhesion of dielectric: 7.8-78 N at 25 mm
• Tensile strength of sheath: ≥ 12.5 N / mm2
• Elongation of cable at break: ≥ 150%
• Crush resistance of cable: <1% (load of 700N)
• Storage: -40 ° C to +70 ° C
• Operating temperature: -40 ° C to +70 ° C
• Minimum installation: -5 ° C
• Maximum tensile strength of the cable: 55 N
• Minimum static bending radius: 70 mm
• Total weight: 46 g / m
• Intended characteristic impedance: 75 ± 3 Ω
• Regularity of impedance:> 40 dB
• DC loop resistance: ≤ 41 Ω / km
• DC resistance inner conductor: ≤ 23 Ω / km
• DC resistance outer conductor: ≤ 18 Ω / km
• Capacitance: 55 pF / m ± 2 pF / m
• Velocity ratio: 0.81 ± 0.02
• Insulation resistance:> 10 4 M Ω .km
• Voltage test of dielectric: 2 kVDC
• Screening efficiency 30-1000 MHz: ≥ 85 dB
• Return loss at
  • 5-30 MHz: ≥ 23 dB *
  • 30-470 MHz: ≥ 23 dB *
  • 470-862 MHz: ≥ 20 dB *
  • 862-2400 MHz: ≥ 18 dB *

* Max. 3 peak values 4 dB lower than specified.