This 4/1 DiSEqC switch from Atemio EMP is suitable for sending the satellite signal from 4 satellites to one digital receiver.

The Atemio DiSEqC switch 4/1 is designed for the demanding user. The switch has 4 satellite inputs and 1 output. Support of the DiSEqC 1.1 or 1.2 protocol by the satellite receiver is a requirement. This is now the case with all (new) satellite receivers. The Atemio 4/1 switch is equipped with a waterproof housing, so it can be attached directly behind the dish to the mounting tube or to, for example, the wall bracket with tie-wraps.

Advantages of Premium-Line switches

• Premium-Line switches are weatherproof due to outdoor plastic housing
• Support of Twin / Quad / Octo LNBs ("High ISO")
• Protected against short circuits
• Also functions under extreme temperatures

Specifications Atemio DiSEqC switch 4/1

General

• EMP/ Atemio DiSEqC Switch 4/1
• 4 inputs / 1 output
• 4 LNBs / satellites
• Control Signal: Position & option
• Suitable for digital DVB-S and HDTV (DVB-S2)
• Twin LNB compatible
• Quad LNB compatible
• Note: when using Quattro LNBs, a multiswitch is required!

Technology

• Frequency range SAT: 950 ~ 2,300 MHz
• Connection loss: 8 dB
• Isolation SAT / SAT:> 25 dB
• Shift control: DiSEqC position
• DiSEqC 1.0, 2.0

Power supply

• Short circuit protection
• Power supply via satellite receiver
• Current consumption: max. 35 mA / 18 V DC
• Temperature range: -30 ~ +70 ° C
• Dimensions (W x H x D): 82 x 19 x 77 mm